Home ProductsWater Softener Plant

10 Ton/ Hour Water Softener System / Hard Water Treatment Plant Automatic Operation

10 Ton/ Hour Water Softener System / Hard Water Treatment Plant Automatic Operation

10 Ton/ Hour Water Softener System / Hard Water Treatment Plant Automatic Operation

Product Details:

Place of Origin: China
Brand Name: FeiYue
Certification: CE/ISO9001:2008
Model Number: FY-1701

Payment & Shipping Terms:

Minimum Order Quantity: 1set
Price: negotiation
Packaging Details: 1.Winding with the crashworthy foam 2.Packed with the double deck carton 3.Using the pallet for the flange tanks
Delivery Time: 5 days
Payment Terms: L/C, T/T
Supply Ability: 80+sets+month
Detailed Product Description
Product Name: 5-8 Tons/hour Softener Water System/softening Water Plant In Water Treatment Type: Hard Water Softener
Resin Tank: FRP Operating Temperature: 1℃-49℃
Soft Water: ≤0.03mmol/L; Pressure: 0.1~0.4 Mpa
Capacity: 10000L Voltage: 220V
Operation: Automatic

10 Ton/ Hour Water Softener System / Hard Water Treatment Plant Automatic Operation
Product Introduction
The working process of water softener, generally consists of the following steps: cyclic backwashing, salt absorption (regeneration), slow flushing (replacement), quick rinse five process. All processes of different
softening water equipment are very close, just because the actual process or different control needs,
there may be some additional procedures. Any of the sodium ion exchange based water softening
equipment is developed based on these five processes. The automatic softener operation program:

A. Operation (work)
Raw water in a certain pressure (0.2-0.6Mpa), flow rate, the body cavity by the controller, into the

containers of ion exchange resin (resin cans), resin contained in Na + and the cation in the water (Ca2 +,

magnesium 2 +, Fe2 +, etc) to exchange, which makes water of Ca2 +, magnesium 2 + ion content meet

the established requirements, to achieve the softening of hard water.

B. Backwashing

After the resins are expired, the backwash is carried out from bottom to bottom before recycling.The

purpose of reverse washing is to have two, one is through reverse washing, make the resin layer that

runs medium pressure is loosened, favorable to the resin particle and the regeneration liquid to make full

contact;The first is that the suspended solids and broken resins accumulated on the surface of the resin

are discharged with anti-wash water, so that the flow resistance of the exchanger will not become larger

and larger.

C. Regenerated salt

The regenerated salt solution is used to restore the original exchange capacity under certain

concentration and discharge.

D. Replacement (slow cleaning)

In the regeneration solution into after exchanger is not involved in the regeneration of salt solution

exchange, with less than or equal to the velocity of regenerated liquid water for cleaning (slow cleaning),

in order to make full use of the role of regenerating salt liquid and reduce the wash load.

E. Washing (quick cleaning)

The aim is to remove residual waste from the resin layer and usually clean it at normal flow rate until the

water is qualified.

F.  Regeneration tank water flooding

The amount of salt required to regenerate the solution once more is injected into the regeneration tank

 Working principle

The hardness of water is mainly composed of cations: calcium (Ca2 +) and magnesium (Mg2+)

ions.When containing raw water hardness ions through the exchanger resin layer, the water of calcium

and magnesium ions with sodium ions in resin in displacement, resin absorption of calcium, magnesium

ion and sodium ion in the water, so from escaping from the exchange of water is to remove the

demineralized water hardness ions.Along with the ongoing exchange process, resin Na + all lose their

ability to exchange, after it was put out at this point you must use the sodium chloride solution for resin

regeneration, the resin adsorption of Ca2 +, magnesium 2 + displacement, resin adsorption of sodium

ions, again returned to soften the exchange capacity

10 Ton/ Hour Water Softener System / Hard Water Treatment Plant Automatic Operation

 
Product Packing
 
10 Ton/ Hour Water Softener System / Hard Water Treatment Plant Automatic Operation

 

 

Contact Details
Shijiazhuang FeiYue Environmental Technology Co.,Ltd

Contact Person: yue

Send your inquiry directly to us (0 / 3000)

Other Products